|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6565 is a white nylon floor guide for a single 1-3/8 in thick door. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8 in H aligners and four No.8 x 3/4 in Phillips pan head sheet metal screws.
|
N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to match. Fits up to a 1-3/8 in thick door.
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others.
|
National Hardware V391A Folding Door Aligner, Steel, Zinc
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6583 is a top mount bi-fold door pivot. Used on Cox doors, the spring-loaded 1/4 in steel pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
1-1/4 x 2 in, universal bi-fold door aligner, yellow zinc plated finish.
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.
|
N 6539 is a 4 in long bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon base; fits Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H nylon base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.
|
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware.
|
N 6703 is a spring loaded, 7/8 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Commonly used by Kenna Frame as well as countless other bi-fold door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Guide Roller, Bearing Type: Ball, Steel, Zinc, Suitable for: Folding Door Frames
|
Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8 in L x 7/8 in D x 1-5/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16 in L x 15/16 in D x 1-3/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6545 is a top mount bi-fold door pivot. Used on Acme and Cox doors, the spring-loaded 3/8 in pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
N 6702 is a top mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16 in L x 1 in W overall. Includes two #8 x 1-1/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W groove. Includes bracket, bottom pivot and 3 installation screws.
|
1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.
|
N 6611 is a spring-loaded 3/4 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 in to 1-3/8 in thick and up to 30 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door manufacturers.
|
National Hardware V391UP Folding Door Upper Pivot, Steel, Zinc, Suitable for: 7/8 in Track Systems, Includes: (1) Pivot, (1) Guide
|
|
|
