|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.
|
N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Johnson Hardware Privacy, Edge Bore Diameter: 1 in, Cross Bore Diameter: 2-1/8 in, Backset Size: 2-3/8 in, US3 Brass
|
N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing that slides into a stamped steel mounting bracket. Used on a 1-3/8 in thick door and 80 lb.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.
|
National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly
|
Sliding door pull in brass substrate in aged bronze.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sliding door pull in brass substrate in satin nickel.
|
Sliding door pull in brass substrate in antique brass.
|
N 7239 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick.
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6771 is a solid brass privacy lock and pull for a pocket door with an polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 2-3/4 in tall and can be reversed from left handed to right handed.
|
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
|
Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors from 1-1/4 in to 1-5/8 in thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
|
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
|
N 6773 is a solid brass privacy lock and pull for a pocket door with an polished chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It can be reversed from left handed to right handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7367 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 3-3/4 in tall by 2-1/2 in deep. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
N 7368 is a solid brass privacy lock and pull for a pocket door with a classic bronze finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
Door preparation 2-1/8 in face bore 1 in edge bore. Adjustable for 1-3/8 in to 1-3/4 in. Latch bolt for flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
|
|
